Biomass CHP Plant

The biomass gasification combined heat and power (CHP) system is an efficient and environmentally friendly energy solution that integrates heating and power generation functions. The biomass gasification CHP can also increase heating capacity by recovering waste heat from cooling towers, achieving the cascade utilization of different quality energy, making it a promising modern biomass energy utilization technology.

Get a free quote

GEMCO Biomass Gasification CHP System

Compared with traditional coal-fired boilers, biomass gasification combined heat and power (CHP) system significantly reduces the emissions of carbides and harmful gases, not only realizing the utilization of clean energy but also bringing good economic and social benefits to users.

biomass gasification combined heat and power plant

Efficient and Eco-Friendly CHP Solution

Biomass gasification combined heat and power generation is one of the most effective, clean, and economical methods for utilizing biomass energy. By adopting advanced circulating fluidized bed gasification technology, biomass raw materials are converted into combustible gases mainly composed of CO and H2. These gases are further purified to remove impurities such as tar and ash, then can be used to drive gas turbines or gas internal combustion engines for power generation. Waste heat boilers and steam turbines can also be added for power generation to improve power generation efficiency.

Contact Us
circulating fluidized bed gasification system

Advanced CFB Gasification Technology

GEMCO biomass CHP plants use the micro negative pressure circulating-fluidized bed (CFB) gasifier. Biomass undergoes a physical evolution process of aggregation, settling, blowing, rising, and re-aggregation in the furnace under the auxiliary fluidization of bed materials; Gas, biomass, and bed materials undergo intense heat and mass transfer and contact reactions in a circulating bed, forming a furnace circulation. At the same time, the gas rapidly entrains the small particles of biomass and bed materials, and the residual combustible components and bed materials are separated by a cyclone separator. They are then sent back to the reaction zone by a return device, forming a material circulation outside the furnace. The establishment of two types of circulating equilibrium inside and outside the gasifier constitutes the core of the CFB gasification, ensuring the stability of the reaction process.

why choose us

GEMCO Biomass Gasification CHP Plant Advantages

Flexible technological adaptability

GEMCO biomass gasification CHP system demonstrates a high degree of flexibility, allowing users to choose various power generation equipment such as internal combustion engines, gas turbines, waste heat boilers, and steam turbines according to their actual needs, thus meeting different energy utilization scenarios of different scales and effectively utilizing the dispersed distribution of biomass energy to provide diversified solutions for various industrial and local energy needs.

Excellent environmental performance

The system uses renewable biomass as raw material, which significantly reduces the emissions of greenhouse gases and harmful substances such as CO2 and SO2. The optimized gasification system design significantly reduces overall energy consumption, with less NOX content in emissions, less fly ash, and reduced flue gas treatment costs. The carbon ash and slag ratio of the system can be adjusted according to user needs to further improve resource utilization efficiency, and is more environmentally friendly.

Outstanding economic benefits

Biomass gasification CHP belongs to renewable energy projects, for which many countries have introduced incentive policies and corresponding financial subsidies. And the equipment structure of the system is relatively simple, no high-voltage processing technology is needed, and has low operation and maintenance costs, so the investment cost is lower than other power generation projects. The comprehensive power generation cost of the system has approached that of small-scale conventional energy projects and is very competitive in the market, which makes it a cost-effective energy solution.

Stable and intelligent operation

GEMCO biomass CHP system adopts advanced DCS control technology and intelligent interlocking design, which can monitor the overall operation status of the system in real-time 24 hours a day. The system is also equipped with a 5G energy intelligent cloud system, which supports online data collection and condition monitoring, helping users to keep track of the operation process at any time. Multi point real-time monitoring and intelligent safety valve design not only enhance the safety of the system, but also effectively reduce potential operational risks.

Efficient energy utilization

The energy utilization rate of the system is over 80%, and the energy waste in this system is effectively reduced by realizing the cascading utilization of energy of different qualities. It is adaptable to various biomass raw materials and can adjust the energy output ratio according to customer needs, supporting multi generation energy supply mode. The distributed small-scale CHP solutions are especially suitable for providing efficient energy services to small and dispersed areas.

GEMCO Biomass Gasification CHP Plant Design

system design of GEMCO biomass chp plant
1. Crusher
2. Control room
3. Gentry Crane
4. Material Storage
5. Circulation Water Heat Exchange System
6. Feeding System
7. Gasification System
8. Gas Burning System
9. Gas Steam Boiler
10. Steam Outlet
11. Gas Distribution Tank
12. Steam Turbine
13. Denitrification System
14. Bag Filter
15. Boiler Water Tank
16. Soft Water Treatment System
17. ID Fan
18. Chimney

Raw Material Handling System

The raw material handling system is the starting point of the biomass gasification cogeneration system, responsible for the preprocessing, storage, and transportation of biomass feedstock. Its primary functions include crushing and drying the raw material to meet the particle size and moisture requirements for gasification. Key equipment includes crushers, dryers, and grab buckets, ensuring a continuous and stable supply of raw materials through efficient operations.

Biomass Gasification System

The biomass gasification system forms the core of the process, utilizing either a circulating fluidized bed gasifier or an updraft fixed bed gasifier. This system converts biomass through pyrolysis and gasification into syngas while recovering by-products such as biochar and tar. Circulating fluidized bed gasifiers are suitable for a wide range of feedstocks and offer high gasification efficiency, while fixed bed gasifiers are ideal for smaller-scale applications with simple and reliable operation.

Gas Purification System

The gas purification system ensures the syngas generated by the gasifier is free from impurities such as tar and ash. It employs catalytic cracking to efficiently remove tar, ensuring the purified syngas meets quality standards for combustion and power generation while reducing equipment wear and emission pollution.

Waste Heat Recovery System

The waste heat recovery system maximizes energy efficiency by utilizing the heat released during the combustion processes of the gasifier and gas boiler. The recovered heat is used to generate hot water for heating, offering a comprehensive energy solution that lowers operational costs for users.

Power Generation System

The power generation system converts syngas into electricity and supports multiple generator types, such as internal combustion engines and gas turbines. The heat generated during power production can be utilized to provide hot water for heating, achieving multi-functional energy utilization. This module is designed to flexibly meet diverse power generation needs across various application scenarios.

 Flue Gas Purification System

The flue gas purification system ensures that emissions meet environmental standards. It employs multiple techniques, including baghouse filtration, spray towers, and activated carbon purification, to effectively remove particulate matter and harmful components from the exhaust gases. This demonstrates the system’s commitment to environmental sustainability.

Need complete Biomass Gasification CHP solutions?

Get a quote now!
biomass gasification chp work flow

Biomass Gasification CHP Plant Work Flow

Raw Materials: Biomass Pellets, Wood Chips, Straw, Coconut Shells, Rice Husks, etc.

Main Products: Electric Power, Heat

By Products: Biochar, Wood Tar, Wood Vinegar, etc.

Application: Small and medium-sized energy stations, distributed energy stations, and heating and power supply in remote areas.

get a customized design

GEMCO Biomass Gasification CHP Plant Parameters

Power Generation1.5MW3MW
Steam Turbine ModelN1.5-2.35;5.51,8.27N3-2.35;5.33,16
Boiler Capacity10t20t
Steam Parameter2.5MPa,400℃2.5MPa,400℃
Gasifier ModelSR3200SR4300
Gasification Effiency≥75%≥75%
Syngas Heating Value1100~1450kcal/kg1100~1450kcal/kg
Raw Material Consumption2800kg/h5600kg/h
Syngas Production6160Nm³12320Nm³
Heat Recovery60* 10⁴kcal120*10⁴kcal
Bag Filter10t20t
Electrical ControlDCS+Host computerDCS+Host computer
Operating Power Consumption320kw620kw
System Footprint1000m²1500m²
Get In Touch

Get in touch with us for a free consultation or request a customized quote, our expert engineering team is always ready to help. Together, we can build a clean, efficient, and sustainable future.

Customized EPC Projects

Reply Within 24 hours

After Sales Services