The biomass cogeneration technology is also called as biomass combined heat and power (CHP). The biomass CHP plant uses agricultural and forestry residues (such as straw, rice husks, fruit shells, and forestry by-products) as raw materials, and converts them into combustible gas along with by-products like biochar through pyrolysis and gasification. The gas produced can be directly used as a coal substitute for heating boilers and power generators, reach the simultaneous production of electricity and heat.
In addition to energy production, the by-product of biomass gasification like biochar and tar can be further processed into high-value-added products, such as activated carbon, industrial carbon, and carbon-based fertilizers, depending on the raw material used. Furthermore, biomass extracts recovered during the process can be used to produce liquid fertilizers.
Current Development of Biomass Gasification Cogeneration
After more than 20 years of development, biomass gasification power generation and cogeneration technologies have reached a relatively mature stage.
Finland
Finland leads the world in the development of biomass cogeneration technology and was among the first countries to apply this technology in practice.
The Kokkola power plant, completed in 2002, uses peat and wood chips as fuel and employs bubbling fluidized bed technology. It has a rated power output of 20 MW and a rated heat output of 50 MW. Additionally, the Alholmens Kraft power plant, located in Pietarsaari and commissioned in 2002, is the world’s largest biomass cogeneration plant. Its primary fuels are waste wood and peat, supplemented by coal and oil, which are typically used during startup. The plant has a total power generation capacity of 240 MWel and a steam production capacity of 100 MW.
Moreover, Finland’s original Kymijärvi power plant was transformed into a biomass cogeneration facility integrating gasification technology with gas turbines. This upgrade allows the utilization of local biomass and low-cost solid waste fuels through advanced gasification technology.

In Finland, biomass is the largest source of renewable energy, accounting for 85% of renewable energy supplies in 2001. By 2007, cogeneration had contributed to 29% of the country’s total electricity production.
Denmark
In December 1993, Denmark’s Unsaldo Volund Company constructed and commissioned the first large-scale biomass gasification cogeneration plant in Harboore. The system utilized an updraft gasifier, with conventional forest wood chips as the gasification feedstock. Initially, the plant provided heating to nearby villages while demonstrating the continuous operation of the updraft gasifier. By 2000, it expanded its application to biomass gasification cogeneration.
In 2005, the city of Skive in Denmark began constructing the Carbona cogeneration plant, which adopted RENUGAS bubbling fluidized bed gasification technology. The plant was designed with a capacity of 5.5 MW for electricity generation and 11.5 MW for heating.
Denmark has also developed a second-stage biomass gasification technology, in which biomass pyrolysis and gasification occur in separate reactors. This approach, employed by the Viking power plant, achieves higher gasification efficiency. It utilizes waste heat from the generator’s exhaust gases to heat the pyrolysis reactor. Additionally, the pyrolysis gas passes through heat exchangers to supply heat externally, creating an integrated heating solution.

United States
The United States is one of the earliest countries to develop and utilize biomass energy, having started biomass combustion power generation in 1979. Biomass energy has become the most significant renewable energy source in the U.S., accounting for approximately 3% of the country’s total energy supply.
The Battelle biomass gasification power generation demonstration project in the U.S. represents a world-class level of biomass energy utilization. This process produces a medium-heating-value gas without requiring an oxygen production system. The technology employs two virtually separate reactors: The gasification reactor converts biomass into medium-heating-value gas and char residue; the bombustion reactor burns the char residue to supply heat for the gasification process. Heat exchange between the two reactors is facilitated by circulating sand particles that transfer heat between the gasifier and the combustion chamber.
Japan
Japan has also been actively developing biomass gasification power generation technology. In 2006, Kawasaki Heavy Industries provided a wood gasification cogeneration system to the Sekisui House Asai Plant. This system uses wood processing waste generated during the production of materials for wooden residential structures to generate electricity.
In addition to supplying power to the factory, the waste heat is utilized through a heat exchanger, providing hot air for drying processes and hot water for office heating. The system has a power generation capacity of 175 kW, producing 1,750 kWh of electricity daily from 2.2 tons of wood processing waste. This output accounts for nearly 30% of the electricity required by the Asai Plant.

China
Although China started relatively late in developing biomass gasification technology, it has made rapid progress in recent years. Following the country’s commitment to dual carbon goals—achieving peak carbon emissions by 2030 and carbon neutrality by 2060, announced in September 2020—the government has heavily promoted research in renewable energy and provided financial subsidies for green energy projects like biomass gasification.
For example, in 2014, a biomass gasification power generation project was completed in Huaibei City, Anhui Province. The gasification power unit generates 1,200 kWh of electricity and produces 2,400 cubic meters of gas per hour, along with 0.5 tons of carbon that can be processed into carbon-based fertilizers. During the day, the gas supplies energy for cooking and heating for 10,000 households, while at night it is used for power generation. The Baishan biomass gasification project utilizes 20,000 tons of straw annually, playing a significant role in addressing straw burning and its comprehensive utilization in Baishan and nearby towns, while also increasing farmers’ incomes.

Another example is the 2015 biomass gasification cogeneration project in Qingyuan, Zhejiang Province. Using bamboo residues as raw materials, the project consumes 50,000 tons of bamboo waste annually. Its gas-fired internal combustion generator has a capacity of 12,000 kW, generating electricity while producing hot water for heating and activated carbon. The project features a 5 MW generator unit with a single-machine capacity of 500 kW, achieving an annual electricity output of 30 million kWh and an annual production of 3,750 tons of activated carbon.
Development Prospects of Biomass Gasification Cogeneration
This technology enables the production of multiple outputs, including electricity, hot water, activated carbon, industrial carbon, molded barbecue charcoal, carbon-based fertilizers, and liquid fertilizers. It completely disrupts the single-output model of direct combustion for power generation, offering vast development potential.
Implementing and promoting biomass gasification cogeneration technology will contribute to cleaner skies, purer water, and safer food. It is a vital pathway for reducing the use of fertilizers and pesticides while advancing the nation’s green, circular, and sustainable development goals. This technology provides a practical approach to unlocking the immense energy reservoir found in plant-based biomass resources.
With this innovation, the acquisition of green and clean energy can achieve cyclic regeneration, high efficiency, and stability. It represents a groundbreaking milestone in the field of biomass energy utilization, holding significant implications for the future of renewable energy.
